Delta C200 Series User Manual page 196

Call 1(800)985-6929 for Sales
drive in confined space.
When installing the multiple drives, the required air volume
※
should be the required air volume for single drive X the
number of the drives.
Reserved
~
Software Detection GFF Current Level
Settings 0.0~6553.5 %
Software Detection GFF Filter Time
Settings 0.0~6553.5 %
Disable Level of dab
Settings 230V series: 0.0~220.0 Vic
Fault Record 1 (min)
Fault Record 2 (min)
Fault Record 3 (min)
Fault Record 4 (min)
Fault Record 5 (min)
Fault Record 6 (min)
Settings 0~64799 min
Pr.06-63 to Pr.06-68 are used to record the operation time for 6 malfunctions and it can also check
if there is any wrong with the drive according to the internal time.
When the malfunction occurs during operation, it records fault in Pr.06-17~06-22 and operation
time is recorded in Pr.06-63~06-68.
For example: When the first fault ovA occurs after operation 3000 min., second fault ovd occurs at
3482 min., third fault ovA occurs at 4051 min., fourth fault ocA at 5003 min., fifth fault ocA at 5824
min., sixth fault ocd occurs at 6402 min. and seven fault ocS at 6951 min..
It'll be recorded as the following table:
Call 1(800)985-6929 for Sales
deltaacdrives.com
460V series: 0.0~440.0 Vic
deltaacdrives.com
Chapter 11 Description of Parameter Settings|C200 Series
installing single drive in a confined space.
When installing multiple drives, volume of heat
※
dissipation should be the heat dissipated for single
drive X the number of the drives.
Heat dissipation for each model is calculated by
※
rated voltage, current and default carrier.
11-97
sales@deltaacdrives.com
Factory Setting: 60.0
Factory Setting: 0.10
Factory Setting: 180.0/360.0
Factory Setting: Read only
sales@deltaacdrives.com