Cleaning The Cleaning Wiper - MUTOH ValueJet 1304 User Manual

User's Guide ValueJet 1304
Periodical maintenance
5.1.5

Cleaning the cleaning wiper

This sub-section describes how to clean the cleaning wiper.
Cleaning time
Once a week, or when blurs or lacking parts appear on printed media after Head cleaning.
Cleaning method
Follow the procedure below to clean the cleaning wiper.
Note
Use the poly-knit wiper to clean the cleaning wiper.

Step 1:
Step 2:
102
If the printer is switched ON, make sure that:
Printing or other operations are not in progress.

The operation panel display is Normal.

Display the CR Maintenance menu.
Press Menu.

"Menu 1: Setup>" is displayed.

The operation panel shifts to the Setup menu display.

Press >.

"Set1: MediaType" is displayed.

Press + or – to select "Set20: CR Maintenance".

AP-75780 - Revision 1.3