Kona / Kona Apparel Keyboard Features; Automatic - MUTOH Kona Application Manual

4.6

Kona / Kona apparel keyboard features

4.6.1

Automatic

When performing a single or multi-frame contour cut job, start the job via the Go button on
Mutoh's CutServer. It is also possible to launch the job directly from the cutter itself, only on
the condition that the cutter is connected with Mutoh's CutServer. In fact, this function
replaces the Go button.
Start a single or multi-frame contour cutting job as follows:
Press the following buttons in order:
Step 1:



Select whether the job loaded is a single or multi-frame contour cut.
Step 2:
AP-75381 - Revision 1.3
Actions
Contour Cut
Automatic
Application Guide Kona / Kona apparel
Contourcutting
4
61