Language Errors - MUTOH SC-550 Maintenance Manual

4.1.3. LANGUAGE ERRORS

Language errors occur when command data entered from the host computer does not match the data
format of the command mode currently activated on the cutter's side. The error can be caused by a
difference in command type or by a syntax error.
UNDEFINED XX (E01)
ERROR PARAMETER (E02)
ERROR VALUE (E03)
UNKNOWN CHAR (E05)
BUFFER OVERFLOW (E07)
E01 Undefined MH-GL command. Verify computer and cutter language settings.
E02 Incorrect number of parameters was transmitted.
E03 Parameter out of range was transmitted. Verify computer and cutter language settings.
E05 Character unknown to MH-GL was sent. Verify computer and cutter language settings.
E07 Polygon and character buffer overflow. Verify computer and cutter language settings.
ERROR CODE
10% 20% 30% 40%
­
­
­ ­
­ ­
­ ­ ­
POSSIBLE CAUSE & SUGGESTED ACTION
23
Maintenance Manual – SC Cutting Plotter
50% 60% 70% 80%
­
­
­
­
­
90% 100%
AP-74030, Rev / B