HEIDENHAIN ND 7000 Operating Instructions Manual page 159

Quick Start | Logging in for Quick Start
9.2 Logging in for Quick Start
User login
For Quick Start, the Operator user must log in.
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Tap User login in the main menu
If required, log out the user who is currently logged in
Select the Operator user
Tap the Password input field
Enter the password "operator"
If the password does not match the default
password, ask a Setup user or OEM user for the
assigned password.
If the password is no longer known, contact a
HEIDENHAIN service agency.
Confirm entry with RET
Tap Log in
9
159