HEIDENHAIN ND 7000 Operating Instructions Manual page 153

Setup | Single steps for setup
Deleting presets
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
In the status bar, tap Presets
The Presets dialog appears
Tap Edit preset table
The Preset table dialog appears
The entries in the preset table can be locked to
prevent accidental modification or deletion. So you
might need to unlock an entry first in order to edit it.
If necessary, tap Unlock at the end of the row
The symbol changes and the entry can now be edited
To select one or more presets, tap the checkbox in the
relevant row
The active checkbox is highlighted in green
Tap Delete
A message appears
Close the message with OK
The selected preset(s) is/are deleted from the preset table
Tap Close
The Preset table dialog is closed
8
153