Programming (software option) | Block types
13.2.4
Machining patterns
You can define various machining patterns to machine complex shapes. From the
data you enter, the product calculates the geometry of the machining patterns and
optionally displays them in the simulation window.
Before defining a machining pattern, you must
Define a suitable tool in the tool table
Select the tool on the status bar
Further information:
You can load the current axis position with Actual position capture into
the appropriate input fields.
Hole block
Z
Figure 54: Schematic depiction of the Hole block
Parameter
X
Y
Depth
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
"Creating a tool table", Page 147
Description
Center point of the hole in the X plane
Center point of the hole in the Y plane
Target depth for drilling in the Z plane
Default: Through-hole drilling
13
215