HEIDENHAIN ND 7000 Operating Instructions Manual page 276

15
15.7.16 Configuring M functions
Path:
Parameter
Number of the M function
Select image for dialog during
program run
Upload image file
Remove the entry
15.7.17 Text database
Path:
The device features the option of importing your own text database. The Messages
parameter allows you to show various messages.
Parameter
Select text database
Deselect text database
276
Settings ► Service ► OEM area ► Settings ► Program run ► M functions
Settings ► Service ► OEM area ► Settings ► Text database
Explanation
Enter the number of the new M function
Setting range: M2.0 ... M120.0 (0: The output assigned to
the M function is switched to inactive)
Setting range: M2.1 ... M120.1 (1: The output assigned to
the M function is switched to active)
Setting range: M2.2 ... M120.2 (2: The output assigned to
the M function generates a high active pulse of 8 ms)
Select the desired image for display during program run
Copies a selected image file to the storage location /Oem/
Images
File format: PNG, JPG, PPM, BMP , or SVG
Image size: Max. 100 x 70 px
Remove the entry
Explanation
Selecting an XML type text database stored in the device
Further information: "Creating a Text database", Page 121
Deselecting the currently selected text database
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Settings | Service