Single Steps For Setup; Basic Settings - HEIDENHAIN ND 7000 Operating Instructions Manual

Setup | Single steps for setup
8.3

Single steps for setup

The following setup steps build on each other.
To correctly set up the product, make sure to perform the steps in
the order described here
You are logged on as a user of the Setup type (see "Logging in for
Prerequisite:
setup", Page 130).

Basic settings

Setting the date and time
Setting the units of measure
Entering and configuring users
Adding the Operating Instructions
Configuring the network
Configuring the network drive
Configuring the printer
Configuring operation with a mouse or touchscreen
Configuring the USB keyboard
Preparing machining processes
Creating a tool table
Creating a preset table
Setting up the measuring application
Backing up data
Back up settings
Back up user files
Loss of or damage to configuration data!
If the product is disconnected from the power source while it is on, the
configuration data can be lost or corrupted.
Back up the configuration data and keep the backup for recovery purposes
8.3.1 Basic settings
The commissioning engineer (OEM) may have already carried out
several basic settings.
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
NOTICE
8
133