Connecting Touch Probes - HEIDENHAIN ND 7000 Operating Instructions Manual

Installation | Connecting touch probes
5.5

Connecting touch probes

The following touch probes can be connected to the unit:
HEIDENHAIN KT 130 edge finder
Further information:
Comply with the pin layout
Remove and save the dust protection cap
Route the cables depending on the mounting variant
Further information:
Connect the touch probe firmly
Further information:
If the cable connectors include mounting screws, do not overtighten them
Pin layout of X 113
1
LED+ B 5 V
9 10
Din 1 Din 2
B – Probe signals, readiness
TP – Touch Probe, normally closed
Digital inputs:
X113
Din 0...3
GND
Touch probe:
X113
TP
GND
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
"Items supplied and accessories", Page 34
"Assembly of the product", Page 40
"Device overview", Page 47
2 3 4
B 12 V Dout 0
11 12
TP GND
DC 5 V
DC 5 V
5 6 7
DC 12 V DC 5 V Din 0
13 14 15
TP Din 3 LED–
Digital outputs:
X113
DC 5 V
Dout 0
TTL
GND
8
GND
5
51