HEIDENHAIN ND 7000 Operating Instructions Manual page 174

9
9.11.1 Opening a program
9.11.2 Running a program
174
Tap Program run on the product in the main menu
The user interface for Program Run is displayed
Tap Open program in the program management
A dialog box opens
Select the Internal/Programs storage location in the dialog
box
Tap the file Example.i
Tap Open
The selected program is opened
On the machine, insert drill Ø 5.0 mm into the spindle
Tap NC START on the program control
The product highlights the program's first Tool call block
The wizard displays the relevant instructions
Tap NC START again to begin machining
The spindle speed is set, and the first machining block is
highlighted
The individual steps of the Row of holes machining block are
displayed
The axis move to the first position
Drill all the way through with the Z axis
Call the next step in the Row of holes machining block with
Next
The next step is called
Move the axes to the next position
Follow the instructions in the wizard
After you have drilled the row of holes, tap Close
Machining is terminated
The program is reset
The wizard is closed
Quick Start | Machining a row of holes (program run)
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020