HEIDENHAIN ND 7000 Operating Instructions Manual page 210

12
12.3 Managing programs
To run a program, open the program file, which must be of the *.i type.
12.3.1 Opening a program
12.3.2 Closing a program
210
The default storage location for programs is Internal/Programs.
Tap Open program in the program management
Select the storage location in the dialog, e.g.
Internal/Programs
Tap the folder containing the file
Tap the file
Tap Open
The selected program is loaded
Tap Close program in the program management
The opened program is closed
Program run (software option) | Managing programs
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020