HEIDENHAIN ND 7000 Operating Instructions Manual page 70

6
Control
Selecting grouped operating elements
When Software-Option ND 7000 PGM is activated, the following operating
elements are grouped in the main menu:
MDI mode
Program run
Programming
70
Function
File management
Management of the files that are available on the product
Further information:
Page 77
User login
Login and logout of the user
Further information:
If a user with additional permissions ( Setup
or OEM user type) is logged in, then the gear
symbols appears.
Settings
Settings of the product, such as setting up users, configur-
ing sensors, or updating the firmware
Further information:
Switch-off
Shutdown of the operating system or activation of power-
saving mode
Further information:
You can identify grouped operating elements by an arrow.
To select an operating element from the group, tap the
operating element with the arrow (e.g., tap
The operating element is shown as active
Tap the operating element again
The group opens
Select the desired operating element
The selected operating element is shown as active
"File management menu",
"User login menu", Page 78
"Settings menu ", Page 79
"Switch-off menu", Page 80
MDI mode)
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Basic operation | User interface