HEIDENHAIN ND 7000 Operating Instructions Manual page 204

12
12.1 Overview
This chapter describes the Program run operating mode and how to execute a
previously created program in this mode.
Short description
In the Program run operating mode, you use an already created program for part
production. It is not possible to change the program in this operating mode, but
you can check in Single Block mode when running the program.
Further information:
During execution of a program, the wizard guides you through the individual
program steps. The optional simulation window can serve as a graphical
positioning aid for the axes you need to move.
Calling up
1 View bar
Status bar
2
Program control
3
4 Spindle speed (machine tool)
5 Program management
204
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
"Basic operation", Page 59
Further information:
"In Single block mode", Page 206
Tap Program run in the main menu
The operating element belongs to a group.
Further information:
elements", Page 70
The user interface for Program Run is displayed
1
4
5
Program run (software option) | Overview
"Selecting grouped operating
2
3
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020