HEIDENHAIN ND 7000 Operating Instructions Manual page 116

7
Configuring an OEM logo
Configuring nominal values for the spindle speed
On the OEM bar, you can define menu items that control the spindle speeds
depending on the configuration of the machine tool.
Configuring nominal values for the spindle speed
116
Tap Settings in the main menu
Tap Service
Open in the sequence
OEM area
OEM bar
Bar items
Tap Add
Tap the Description input field
Enter a description for the menu item
Confirm the entry with RET
Tap Logo in the Type drop-down list
Tap Select logo to choose a stored image file
If required, tap Upload image file to select a new image file
Further information:
Navigate to the folder containing the image file, and select
the file
Tap Select
Select the desired option from the Link to documentation
drop-down list
You can overwrite configured spindle speeds with the value of the
currently set speed of the spindle axis by pressing and holding the
desired Spindle speed field.
Further information: "Calling functions of the OEM bar", Page 86
Tap Settings in the main menu
Tap Service
Open in the sequence
OEM area
OEM bar
Bar items
Tap Add
Tap the Description input field
Enter a description for the menu item
Confirm the entry with RET
Tap Spindle speed in the Type drop-down list
Tap the name of the spindle in the Spindle drop-down list
Enter the desired nominal value into the Spindle speed input
field
"OEM bar item: Logo", Page 272
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Commissioning | OEM area