HEIDENHAIN ND 7000 Operating Instructions Manual page 95

Commissioning | Steps for commissioning
Configuring the axes
For EnDat interfaces:
Configuring axes for
encoders with EnDat
interface
Performing error
compensation for linear
encoders
Ascertaining the line count
per revolution
Configuring M functions
Configuring M functions
OEM area
Adding documentation
Adding a startup screen
Configuring the OEM bar
Adjusting the display
Defining error messages
Back-up OEM-specific folders and files
Configuring the unit for screenshots
Backing up data
Back up settings
Back up user files
Loss of or damage to configuration data!
If the product is disconnected from the power source while it is on, the
configuration data can be lost or corrupted.
Back up the configuration data and keep the backup for recovery purposes
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
or 11 μA
For 1 V interfaces:
PP PP
Activating the reference
mark search
Configuring the axes for
encoders with a 1 V
PP
µA interface
PP
Performing error
compensation for linear
encoders
Ascertaining the line count
per revolution
NOTICE
or 11
7
95