HEIDENHAIN ND 7000 Operating Instructions Manual page 190

11
11.1 Overview
This chapter describes the Manual Data Input (MDI) operating mode and how to
execute machining steps in single blocks in this mode.
Short description
MDI mode allows you to execute one machining block at a time. The values to
be entered can be applied directly in the input field from a properly dimensioned
production drawing.
The functions provided by MDI mode enable efficient single-part production. For
small-batch production, you can program the machining steps in Programming
mode and then execute them in Program run mode.
Further information:
Further information:
Calling up
190
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
"Basic operation", Page 59
Further information:
Before you can use the product in the MDI mode, the presets must be
set in the Manual Operation mode.
Further information: "Defining presets", Page 178
"Programming (software option)", Page 211
"Program run (software option)", Page 203
Tap MDI in the main menu
The operating element can belong to a group (based
on the configuration).
Further information:
elements", Page 70
"Selecting grouped operating
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
MDI mode | Overview