HEIDENHAIN ND 7000 Operating Instructions Manual page 253

Settings | Axes
15.6.3 Information
Settings ► Axes ► General settings ► Information
Path:
Parameters
Assignment of the encoder
inputs to the axes
Assignment of the analog
outputs to the axes
Assignment of the analog inputs
to the axes
Assignment of the digital outputs
to the axes
Assignment of the digital inputs
to the axes
With the Reset buttons, the assignments for the inputs and outputs can
be reset.
Switching functions
15.6.4
Settings ► Axes ► General settings ► Switching functions
Path:
The switching functions must not be used as a part of a safety function.
Parameters
Inputs
Outputs
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Explanation
Shows the assignment of the encoder inputs to the axes
Shows the assignment of the analog outputs to the axes
Shows the assignment of the analog inputs to the axes
Shows the assignment of the digital outputs to the axes
Shows the assignment of the digital inputs to the axes
Explanation
Assignment of the digital input for the respective switching
function according to the pin layout
Further information: "Inputs (Switching functions)", Page 254
Assignment of the digital output for the respective switching
function according to the pin layout
Further information: "Outputs (Switching functions)",
Page 254
15
253