Figure 41: Manual Operation Menu - HEIDENHAIN ND 7000 Operating Instructions Manual

10
10.1 Overview
This chapter describes the Manual operation mode and how to execute simple
machining operations in this mode on a workpiece.
Short description
By traversing the reference marks on the encoder scales, you make it possible
to define an absolute position. When you have completed the reference mark
search in Manual mode, you then set the presets that will be used as the basis for
machining the workpiece in accordance with the drawing.
Position measurement and tool selection for simple machining operations are
described below.
Activation

Figure 41: Manual operation menu

1 Axis key
2 Reference
Position display
3
Status bar
4
5 Spindle speed (machine tool)
176
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
"Basic operation", Page 59
Further information:
Presetting in the Manual Operation mode is required in order to use the
product in MDI mode.
The reference mark search does not need to be performed for serial
encoders with EnDat interface, because the axes are automatically
homed.
Tap Manual operation in the main menu
The user interface for manual operation is displayed
1 2
3
5
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Manual operation | Overview
4