HEIDENHAIN ND 7000 Operating Instructions Manual page 277

Settings | Service
15.7.18 Messages
Settings ► Service ► OEM area ► Settings ► Messages
Path:
Parameter
Name
Text ID or text
Message type
Input
Remove the entry
15.7.19 Back up and restore (OEM area)
Settings ► Service ► OEM area ► Back up and restore
Path:
Parameter
Back-up OEM-specific folders
and files
Restore OEM specific folders and
files
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Explanation
Description of the message
Selecting the message to be displayed. You can enter a text
ID and use it to select an existing message text from your
text database. As an alternative, you can directly enter a new
message text
If you change the language of your product's user
interface, the translated message texts from the text
database are used. Message texts you have directly
entered are shown untranslated.
Further information: "Text database", Page 276
Selecting the desired type of message
Settings:
Standard: The message is displayed as long as the input is
active
Acknowledgment by user: The message is displayed until
the user acknowledges it
Default value: Standard
Assignment of the digital input in accordance with pin layout in
order to show the message
Default value: Not connected
Removing the message entry
Explanation
Backing up the settings of the OEM area as a ZIP file
"Back-up OEM-specific folders and files",
Further information:
Page 124
Restoring the settings of the OEM area as a ZIP file
Further information: " Restore OEM specific folders and files",
Page 124
15
277