Configuring The Oem Bar - HEIDENHAIN ND 7000 Operating Instructions Manual

Commissioning | OEM area
Safely removing a USB mass storage device
When you save the user files, the OEM-specific opening screen is also
saved and can be restored.
Further information:
7.4.3

Configuring the OEM bar

You can configure the appearance and the menu items of the OEM bar.
If you configure more menu entries than can be shown in the OEM bar,
then you can scroll the OEM bar vertically.
Showing or hiding the OEM bar
Configuring the OEM logo
You can display an OEM-specific company logo on the OEM bar. By tapping the
OEM logo, you can optionally open a PDF file of the OEM documentation.
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Tap File management in the main menu
Navigate to the list of storage locations
Tap Safely remove
The message The storage medium can be removed now.
appears
Disconnect the USB mass storage device
"Back up user files", Page 127
Tap Settings in the main menu
Tap Service
Open in the sequence
OEM area
OEM bar
Use the ON/OFF slider to activate or deactivate the Show bar
function
7
115