User Login; User Logout - HEIDENHAIN ND 7000 Operating Instructions Manual

6
6.5.1

User login

Further information:
6.5.2

User logout

66
Tap User login in the main menu
Select the user in the drop-down list
Tap the Password input field
Enter the user's password
User Default password
OEM oem
Setup
setup
Operator operator
Further information: "Logging in for Quick Start", Page 159
If the password does not match the default
password, ask a Setup user or OEM user for the
assigned password.
If the password is no longer known, contact a
HEIDENHAIN service agency.
Confirm entry with RET
Tap Log in
The user is logged in and the Manual operation menu is
displayed
"Target groups according to user types", Page 22
Tap User login in the main menu
Tap Log out
The user is logged out
All functions of the main menu are inactive, except for Switch
off
The product can only be used again after a user has logged in
Basic operation | User login and logout
Target group
Commissioner,
machine tool builder
Setup engineer,
system configurer
Operator
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020