Basic operation | Status bar
6.10.4
Calculator
For calculations, the product provides various calculators in the status bar. To enter
the numerical values, use the numeric keys as on a normal computer.
Calculator
Standard
Speed calculator
6.10.5
Additional functions in Manual operation mode
The following operating elements are available:
Operating
element
6.11
OEM bar
The status bar and the optional OEM bar are not available in the
Programming menu.
The optional OEM bar allows you to control the configuration of the functions of
the connected machine tool, independently of its configuration.
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Function
Contains the most important mathematical functions
Enter the Diameter (mm) and Cutting speed (m/min)
in the provided fields
The speed is calculated automatically
To call the additional functions, tap
the status bar
Function
Reference marks
For starting the reference mark search
Further information:
"Activating the reference mark
search", Page 101
Probing
For probing the edge of a workpiece
"Defining presets", Page 178
Further information:
Probing
For finding the centerline of a workpiece
Further information:
"Defining presets", Page 178
Probing
For finding the center point of a circular feature (hole or
cylinder)
"Defining presets", Page 178
Further information:
in
Additional functions
6
85