HEIDENHAIN ND 7000 Operating Instructions Manual page 270

15
15.7.5 OEM area
Path:
Parameters
Documentation
Startup screen
OEM bar
Settings
Back up and restore
Remote access for screenshots
Startup screen
15.7.6
Path:
Parameter
Add startup screen
Delete startup screen
270
Settings ► Service ► OEM area
Settings ► Service ► OEM area ► Startup screen
Explanation
Addition of OEM documentation, e.g. service information
"Adding documentation", Page 113
Further information:
Changing the startup screen (e.g., with one's own company
logo)
Further information: "Startup screen", Page 270
Customization of the OEM bar with specific functions
"OEM bar", Page 271
Further information:
Adaptation of the application mode, override display, keyboard
design, and program execution.
Management of texts and messages.
"Settings (OEM area)", Page 275
Further information:
Backing up and restoring the settings of the OEM area
Permitting a network connection with the ScreenshotClient
program so that ScreenshotClient can take screenshots of the
unit from a computer
Settings:
ON: Remote access is possible
OFF: Remote access is not possible
Default value: OFF
When the unit is shut down, Remote access for
screenshots is automatically deactivated.
Explanation
Selecting the image file that is to be displayed as opening screen
(file type: PNG or JPG)
"Adding a startup screen", Page 114
Further information:
Delete clears the user-defined opening screen and restores the
default view
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Settings | Service