HEIDENHAIN ND 7000 Operating Instructions Manual page 234

15
15.1 Overview
This chapter describes the setting options and the associated settings parameters
for the product.
The basic setting options and settings parameters for commissioning and product
setup are outlined in the respective chapters:
Further information:
Further information:
Short description
Function
General
Sensors
Interfaces
User
Axes
Service
Activation
234
"Commissioning", Page 91
"Setup", Page 129
Depending on the type of user that is logged in to the product, settings
and settings parameters can be edited and changed (edit permission).
If a user logged in to the product has no edit permission for a setting or
a settings parameter, the setting or settings parameter is grayed out and
cannot be opened or edited.
Depending on the software options that have been activated on the
product, various settings and settings parameters are available in the
Settings menu.
If, for example, the is not activated on the unit, then the settings
parameters that are necessary for this software option are not displayed
on the unit.
Description
General settings and information
Configuration of sensors and sensor-dependent functions
Configuration of interfaces and network drives
Configuration of users
Configuration of connected encoders and error compensation
Configuration of software options, service functions and
information
Tap Settings in the main menu
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Settings | Overview