HEIDENHAIN ND 7000 Operating Instructions Manual page 137

Setup | Single steps for setup
Deleting users
You can remove Operator-type users that are no longer needed.
OEM
Requirement:
Adding the Operating Instructions
The product provides the possibility to upload the corresponding Operating
Instructions in the desired language. You can copy the Operating Instructions from
the supplied USB mass storage device to the product.
The most recent version of the Operating Instructions is also available at
www.heidenhain.de.
Requirement:
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
and Setup-type users cannot be deleted.
A user of or Setup-type is logged in.
OEM
Tap Settings in the main menu
Tap User
Tap the user you want to delete
Tap Remove user account
Enter the password of the authorized user
Tap OK
The user is deleted
The Operating Instructions are available as a PDF file.
Tap Settings in the main menu
Tap Service
Open in the sequence
Documentation
Add Operating Instructions
If required, connect a USB mass storage device (FAT32
format) to a USB port of the product
Navigate to the folder containing the new Operating
Instructions
If you have accidentally tapped the wrong folder, you
can return to the previous folder.
Tap the file name that is displayed above the
list
Select file
Tap Select
The Operating Instructions are copied to the product
Any existing Operating Instructions will be overwritten
Confirm the successful transfer with OK
The Operating Instructions can be opened and displayed on
the product
(OEM or Setup)
8
137