HEIDENHAIN ND 7000 Operating Instructions Manual page 271

Settings | Service
15.7.7 OEM bar
Settings ► Service ► OEM area ► OEM bar
Path:
Parameters
Show bar
Bar items
15.7.8 Adding OEM-Bar items
Settings ► Service ► OEM area ► OEM bar ► Bar items ► +
Path:
Parameters
Description
Type
Parameters
Remove bar entry
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Explanation
Display of the OEM bar
Settings:
ON: The OEM bar is displayed on the user interface of the
respective operating modes
OFF: The OEM bar is not displayed
Default value: OFF
Configuration of the Bar items on the OEM bar
Further information: "Adding OEM-Bar items", Page 271
Explanation
Description of the bar item on the OEM bar
Selecting the new bar item on the OEM bar
Settings:
Empty
Logo
Spindle speed
M function
Special functions
Document
Default value: Empty
The available parameters depend on the type of bar item select-
ed:
Logo:
Further information:
Spindle speed:
Further information:
Page 272
M functions:
Further information:
Page 273
Special functions:
Further information:
Page 274
Document:
Further information:
Page 274
Removing the bar item from the OEM bar
"OEM bar item: Logo", Page 272
"OEM bar item: Spindle speed",
"OEM bar item: M function",
"OEM bar item: Special functions",
"OEM bar item: Document",
15
271