Wizard; Figure 25: Support From The Wizard For Action Steps - HEIDENHAIN ND 7000 Operating Instructions Manual

6
Closing messages
Depending on the content of the messages, you can close messages by means of
the following operating elements:
6.12.2

Wizard

Figure 25: Support from the wizard for action steps

1 Wizard (example)
The wizard assists you in carrying out action steps, programs, or teach processes.
The following operating elements of the wizard are shown based on the action
step or process.
88
To close an informational message, tap Close
The message disappears
or
To close a message that potentially has an effect on the
application, tap OK
If applicable, the message will now be taken into account by
the application
The message disappears
1
To return to the last action step or to repeat the process, tap
Undo
To confirm the displayed action step, tap Confirm
The wizard proceeds to the next step or completes the
process
Tap Next to proceed to the next step
Tap Back to return to the previous step
Tap Close to close the wizard
Basic operation | Messages and audio feedback
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020