Figure 31: Example Workpiece- Technical Drawing - HEIDENHAIN ND 7000 Operating Instructions Manual

9
9.3 Requirements
To manufacture the aluminum flange, use a manually operated machine tool. The
following dimensioned technical drawing is available for the flange:
Figure 31: Example workpiece– technical drawing
Machine tool
The machine tool is switched on
A pre-processed workpiece blank is clamped on the machine tool
Product
A spindle axis is configured (only for the product with ID 1089179-xx)
The axes have been homed
Further information:
A HEIDENHAINKT 130 Edge Finder is available
160
100
90±0.05
80±0.1
Ø50±0.05
"Conducting the reference mark search", Page 177
Quick Start | Requirements
A-A
20
13
10
1x45°
6
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020