Position Display Functions - HEIDENHAIN ND 7000 Operating Instructions Manual

Basic operation | Position display
Symbol
6.9.2

Position display functions

Setting the spindle speed
The following information applies only to units with ID number
1089179-xx.
You can control the spindle speed depending on the configuration of the
connected machine tool.
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Meaning
Spindle speed cannot be achieved with selected gear stage
Select a higher gear stage
Spindle speed cannot be achieved with selected gear stage
Select a lower gear stage
In MDI mode and Program Run , a scaling factor is applied
to the axis
Further information:
access menu", Page 83
Tap or long-press + or – to set the spindle speed to the
desired value
or
Tap the Spindle speed input field, enter the value and tap
RET to confirm
The product applies the entered spindle speed as the
nominal value and controls the spindle of the machine tool
accordingly
"Adjusting settings in the quick
6
81