Basic operation | ND 7000 – switch-on and switch-off
6.4.3
Switching off the ND 7000
Damage to the operating system!
Disconnecting the power source while the product is on can damage the
operating system of the product.
Use the Switch-off menu to shut down the product
Do not disconnect the power source while the product is on
Do not turn the power switch off until the product has shut down
6.5
User login and logout
In the User login menu, you can log in and out of the product as a user.
Only one user can be logged in to the product at a time. The logged-in user is
displayed. Before a new user can log in, the logged-in user has to log out.
The product provides various authorization levels that grant the user full
or restricted access to management and operation functionality.
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
NOTICE
Tap Switch off in the main menu
Tap Shut down
The operating system shuts down
Wait until the following message appears on the screen:
You can switch off the device now.
Turn the power switch off
6
65