HEIDENHAIN ND 7000 Operating Instructions Manual page 212

13
13.1 Overview
This chapter describes the Programming operating mode and how to create new
programs and edit existing programs in this mode.
Short description
The product uses programs for recurring tasks. Programs are created through the
defining of various blocks, such as positioning functions or machine functions. A
sequence of multiple blocks then forms a program. You can save a maximum of
100 blocks within a program.
Calling up
View bar
1
2 Toolbar
3 Program management
212
Make sure that you have read and understood the "Basic operation"
chapter before carrying out the actions described below.
"Basic operation", Page 59
Further information:
Programming does not require connecting the product to a machine
tool.
Tap Programming in the main menu
The operating element belongs to a group.
Further information:
elements", Page 70
The user interface for programming is displayed
1
3
The status bar and the optional OEM bar are not available in the
Programming menu.
Programming (software option) | Overview
"Selecting grouped operating
2
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020