Quick Start | Determining the preset (manual operation mode)
Activating the preset
9.9
Drilling a bolt hole circle (MDI mode)
Drill the circular hole pattern in MDI mode. The values to be entered into the input
fields can be taken directly from the dimensioned production drawing.
Figure 37: Example workpiece – drilling a circular hole pattern
Activation
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Tap Presets on the status bar
The Presets dialog opens
Tap preset 1
Tap Confirm
The preset is set
On the status bar,
is displayed for the preset
1
Tap MDI in the main menu
The operating element can belong to a group (based
on the configuration).
Further information:
elements", Page 70
The user interface for MDI mode is displayed
"Selecting grouped operating
9
169