HEIDENHAIN ND 7000 Operating Instructions Manual page 141

Setup | Single steps for setup
Use the CUPS web interface to configure the enhanced settings of the
connected printer. You can also use this web interface if the printer
information fails over the product.
Further information:
Further information:
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Tap Set standard values
Tap Resolution to set the printer resolution
Select the desired resolution
Tap Resolution once again
Tap Paper size to set the paper size
Select the desired paper size
Depending on the type of printer, select further values such
as type of paper or duplex print
Tap Properties
The entered values are saved as defaults
The printer is added and can be used
"Using CUPS", Page 144
"Printers", Page 239
8
141