HEIDENHAIN ND 7000 Operating Instructions Manual page 118

7
Configuring special functions
On the OEM bar, you can define menu items that control special functions of the
connected machine tool.
Configuring special functions
118
The following information applies only to units with ID number
1089179-xx.
The available functions depend on the configuration of the device and of
the connected machine tool.
Tap Settings in the main menu
Tap Service
Open in the sequence
OEM area
OEM bar
Bar items
Tap Add
Tap inside the Description input field
Enter a description for the menu item
Confirm the entry with RET
Tap Special functions in the Type drop-down list
Tap the desired special function in the Function drop-down
list
Thread cutting
Spindle direction
Coolant
Coolant during spindle operation
Zero the tool axis
For each special function, you can also define corresponding
images for displaying the status using Select image for
active function and Select image for inactive function
Further information:
Page 274
"OEM bar item: Special functions",
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Commissioning | OEM area