HEIDENHAIN ND 7000 Operating Instructions Manual page 209

Program run (software option) | Using the program
Activating the simulation window
Modifying the contour view
12.2.5 Applying the Scaling factor
If a scaling factor is activated for one or more axes, this scaling factor is multiplied
by the stored nominal position during execution of a block. This enables you to
mirror and scale a block.
You can activate a scaling factor in the quick access menu.
Further information:
If the calculated dimensions cannot be attained with the selected tool,
the execution of the block is aborted.
The scaling factor cannot be changed during execution of a block.
12.2.6 Setting the spindle speed
The following information applies only to units with ID number
1089179-xx.
You can control the spindle speed depending on the configuration of the
connected machine tool.
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
To switch to the simulation window, tap Graphic
The simulation window graphically depicts the current block
To return to the position display, tap Position
Tap Detail view
The detail view shows the tool path and the possible
machining positions for the currently selected block
Tap Overview
The overview shows the entire workpiece
"Adjusting settings in the quick access menu", Page 83
Tap or long-press + or – to set the spindle speed to the
desired value
or
Tap the Spindle speed input field, enter the value and tap
RET to confirm
The product applies the entered spindle speed as the
nominal value and controls the spindle of the machine tool
accordingly
12
209