HEIDENHAIN ND 7000 Operating Instructions Manual page 18

1
1.1 Overview
This chapter contains information about the product and this manual.
1.2 Information on the product
Product designation
ND 7000
The ID label is provided on the back of the product.
Example:
ND 70xx xxx
1
3
1 Product designation
Index
2
Part number (ID)
3
1.3 Demo software for the product
ND 7000 Demo is software you can install on a computer regardless of the device.
ND 7000 Demo helps you to become familiar with, try out or present the functions
of the device.
You can download the current version of the software here:
18
ID
1089178-xx,
1089179-xx
2
To download the installation file from the HEIDENHAIN Portal, you
need access rights to the
appropriate product.
If you do not have access rights to the Portal's
request the access rights from your HEIDENHAIN contact person.
Firmware version
1235720.1.2.x
www.heidenhain.de
Software portal folder in the directory of the
Software
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Fundamentals | Overview
Index
---
folder, you can