HEIDENHAIN ND 7000 Operating Instructions Manual page 272

15
15.7.9 OEM bar item: Logo
Path:
Parameters
Description
Type
Select logo
Link to documentation
Upload image file
Remove bar entry
15.7.10 OEM bar item: Spindle speed
Path:
Parameters
Description
Type
Spindle
Spindle speed
Remove bar entry
272
Settings ► Service ► OEM area ► OEM bar ► Bar items ► Logo
Settings ► Service ► OEM area ► OEM bar ► Bar items ► Spindle speed
Explanation
Description of the bar item on the OEM bar
Logo
Selecting the desired image for the depiction
Using a logo for calling linked documentation
Settings:
None
Operating Instructions
OEM service info
Default value: None
Copies a selected image file to the storage location /Oem/
Images
File format: PNG, JPG, PPM, BMP , or SVG
Image size: max. 140 x 70 px
Removing the bar item from the OEM bar
Explanation
Description of the bar item on the OEM bar
Spindle speed
S
Setting the spindle speed
Setting range: depends on the configuration of the spindle
axis S
Default value: 0
Removing the bar item from the OEM bar
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Settings | Service