HEIDENHAIN ND 7000 Operating Instructions Manual page 255

Settings | Axes
15.6.7 Adding M functions
Settings ► Axes ► General settings ► M functions ► +
Path:
Parameters
Name
15.6.8 Configuring M functions
Settings ► Axes ► General settings ► M functions ► M100 ... M120
Path:
Parameters
Name
Digital output
Remove
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Explanation
Entry of the name for the new M function
Setting range: M100 ... M120
For the configuration, see "Configuring M functions", Page 255
Explanation
Entry of the name for the M function
Setting range: M100 ... M120
Assignment of the digital output for the M function according to
pin layout
Default value: Not connected
Removal of the selected M function
15
255