HEIDENHAIN ND 7000 Operating Instructions Manual page 278

15
15.7.20 Documentation
Path:
The product provides the possibility to upload the corresponding Operating
Instructions in the desired language. The Operating Instructions can be copied
from the supplied USB mass storage device to the product.
The latest version can be downloaded from the download area at
www.heidenhain.de.
Parameters
Add Operating Instructions
15.7.21 Software options
Path:
Parameter
Overview
Request options
Request trial options
Activate options
Reset trial options
278
Settings ► Service ► Documentation
Settings ► Service ► Software options
Software options need to be enabled on the product via a license key.
Before you can use the associated hardware components, you need to
enable the respective software option.
Further information: "Activating the Software options", Page 96
Explanation
Adding the Operating Instructions in the desired language
Explanation
Overview of all software options that are active on the product
Creation of a license key request that can be submitted to a
HEIDENHAIN service agency
"Requesting license key", Page 96
Further information:
Creation of a license key request that can be submitted to a
HEIDENHAIN service agency
Further information: "Requesting license key", Page 96
Activation of the software options via license key or license file
Further information: "Activating a license key", Page 97
Reset of the trial options by entering a license key
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Settings | Service