HEIDENHAIN ND 7000 Operating Instructions Manual page 142

8
Adding a network printer
Requirement:
Further information:
Further information:
142
A network printer or network is connected to the product.
"Connecting a printer", Page 55
"Connecting a network peripheral", Page 56
Tap Settings in the main menu
Tap General
Tap Printers
Open in the sequence
Add printer
Network printer
Printers available on the network are detected automatically
Tap Located printers
The list of detected printers is displayed
If only one printer is connected, the printer is selected
automatically
Select the desired printer
Tap Located printers once again
The available printer information, e.g. name and description,
is displayed
If required, enter a name for the printer into the Name input
field
The text must not contain slashes ("/"), hash
characters ("#") or spaces.
Confirm your input with RET
If required, enter an optional description for the printer into
the Description input field, e.g. "Color printer"
Confirm your input with RET
If required, enter an optional location into the Location input
field, e.g. "Office"
Confirm your input with RET
If required, enter the connection parameters into the
Connection input field, if they have not been entered
automatically
Confirm your input with RET
Tap Select the driver
Select the appropriate driver for the printer type
If the appropriate driver is not listed, a suitable PPD
file must be copied to the product.
Further information:
The driver is activated
Tap Close in the message
Tap Set standard values
Tap Resolution to set the printer resolution
Setup | Single steps for setup
"Finding PPD files", Page 143
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020