Figure 59: Simulation Window With Contour View - HEIDENHAIN ND 7000 Operating Instructions Manual

13
13.4.1 Depiction as contour view
The simulation window displays a contour view. The contour view aids in the
precise positioning of the tool or with contour tracking in the machining plane.
The contour view uses the following colors (defaults):

Figure 59: Simulation window with contour view

1 Machining pattern (white)
2 Current block or machining position (green)
3 Tool contour, tool position and tool path (orange)
13.4.2 Activating the simulation window
222
Programming (software option) | Using the simulation window
Tap Graphic on the view bar to enlarge the simulation
window
The simulation window for the highlighted block appears
To leave the simulation window, tap Position in the view bar
The parameter view is shown
1 2
3
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020