HEIDENHAIN ND 7000 Operating Instructions Manual page 286

16
Reset all settings
16.8
You can reset the settings of the product to the factory defaults if required. The
software options are deactivated and must be subsequently reactivated with the
available license key.
Reset to shipping conditions
16.9
You can reset the settings of the product to the factory defaults and delete the
user files from product's memory area. The software options are deactivated and
must be subsequently reactivated with the available license key.
286
Tap Settings in the main menu
Tap Service
Open in the sequence
Reset
Reset all settings
Enter password
Confirm the entry with RET
To show the password in plain text, activate Show password
Tap OK to confirm the action
Tap OK to confirm the reset
Tap OK to confirm shutdown of the device
The product is shut down
All settings are reset
To restart the product, switch it off and then back on
Tap Settings in the main menu
Tap Service
Open in the sequence
Reset
Reset to shipping conditions
Enter password
Confirm the entry with RET
To show the password in plain text, activate Show password
Tap OK to confirm the action
Tap OK to confirm the reset
Tap OK to confirm shutdown of the device
The product is shut down
All settings are reset and the user files are deleted
To restart the product, switch it off and then back on
Servicing and maintenance | Reset all settings
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020