HEIDENHAIN ND 7000 Operating Instructions Manual page 185

Manual operation | Defining presets
10.3.7 Setting a position as a preset
For simple machining operations, you can use the current position as a preset and
perform simple position calculations.
Requirement:
A workpiece is clamped on the machine tool
The axes have been homed
Further information:
Setting the current position as preset
X
Defining the position values of the current position
X
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
"Conducting the reference mark search", Page 177
Approach the desired position
Long-press the axis key
The active preset in the preset table is overwritten with the
current position
The active preset is applied as the new value
Perform the desired machining operation
Approach the desired position
In the working space, tap the axis key or the position value
Enter the desired position value
Confirm the entry with RET
The position value is applied to the current position
The entered position value is linked with the current position
and overwrites the active preset in the preset table
The active preset is applied as the new value
Perform the desired machining operation
10
185