HEIDENHAIN ND 7000 Operating Instructions Manual page 273

Settings | Service
15.7.11 OEM bar item: M function
Settings ► Service ► OEM area ► OEM bar ► Bar items ► M function
Path:
Parameters
Description
Type
Number of the M function
Pulse time
Restart
Select image for active function
Select image for inactive
function
Upload image file
Remove bar entry
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Explanation
Description of the bar item on the OEM bar
M function
Selection of the desired M function
Setting ranges
100.T ... 120.T (TOGGLE: switches between the states
when tapped)
100.P ... 120.P (PULSE: The length can be set in Pulse time)
Default value: Empty
Selecting the length of the high-active pulse
Setting range
8 ms ... 1500 ms
Default value: 500 ms
Restarting the pulse duration
Settings: ON or OFF
Default value: OFF
Selecting the desired image for depicting the active function
Selecting the desired image for depicting the inactive function
Copies a selected image file to the storage location /Oem/
Images
File format: PNG, JPG, PPM, BMP , or SVG
Image size: Max. 100 x 70 px
Removing the bar item from the OEM bar
15
273