HEIDENHAIN ND 7000 Operating Instructions Manual page 134

8
Setting the date and time
Further information:
Setting the units of measure
You can set various parameters to define the units of measure, rounding methods
and decimal places.
Further information:
Entering and configuring users
The following user types, which have different rights, are defined in the product's
factory default settings:
OEM
Setup
Operator
134
Tap Settings in the main menu
Tap General
Tap Date and time
The set values are displayed in the following format: Year,
month, day, hour, minute
To set the date and time in the middle line, drag the columns
up or down
Tap Set to confirm
Select the desired format from the Date format list:
MM-DD-YYYY: Display as month, day, year
DD-MM-YYYY: Display as day, month, year
YYYY-MM-DD: Display as year, month, day
"Date and time", Page 240
Tap Settings in the main menu
Tap General
Tap Units
To set a unit of measure, tap the corresponding drop-down
list and select the unit
To set the rounding method, tap the corresponding drop-
down list and select the rounding method
To set the number of decimal places displayed, tap – or +
"Units", Page 241
Setup | Single steps for setup
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020