Operating Elements Of The Oem Bar; Calling Functions Of The Oem Bar - HEIDENHAIN ND 7000 Operating Instructions Manual

6
6.11.1

Operating elements of the OEM bar

The following operating elements are typically available in the OEM bar:
Operating
element
6.11.2

Calling functions of the OEM bar

The operating elements in the OEM bar allow you to control special functions (e.g.,
spindle functions).
Further information:
Setting spindle speed
Programming spindle speed
86
The operating elements that are available on the OEM bar depend on
the configuration of the device and of the connected machine tool.
"Configuring the OEM bar", Page 115
Further information:
Function
Tapping the tab shows or hides the OEM bar
Logo
Displays the configured OEM logo
Spindle speed
Shows one or more default values for the spindle speed
Further information:
spindle speed", Page 116
The operating elements that are available on the OEM bar depend on
the configuration of the device and of the connected machine tool.
"Configuring the OEM bar", Page 115
Further information:
"Configuring special functions", Page 118
Tap the Spindle speed field on the OEM bar
The product applies the predefined voltage value at which
the spindle of the connected machine tool is brought to the
selected rotational speed (with no load on the spindle)
Tap or long-press + or – to bring the spindle to the desired
rotational speed
Press and hold the desired Spindle speed field on the OEM
bar
The background color of the field is highlighted in green
The product applies the current spindle speed as the nominal
value and displays it in the Spindle speed field
"Configuring nominal values for the
HEIDENHAIN | ND 7000 | Operating Instructions Milling | 01/2020
Basic operation | OEM bar