Optional) Adjusting It Cabinet Side Plates - Huawei FusionModule5000 Series Installation Manual

FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)
Do not remove the screws.
Figure 4-37 Relocating the baffle plate
Step 2 Remove the screw shown by (2) in
Step 3 Rotate the baffle plate 60 degrees. After the direction is adjusted, secure the removed screw to
the other reserved hole, and tighten the other two screws, as shown by (3) in
----End

4.5 (Optional) Adjusting IT Cabinet Side Plates

Context
IT cabinets are not furnished with all side plates.


Issue 01 (2019-03-05)
Before installing an IT cabinet, adjust the side plate position based on the side plate
labels and ensure that plates are installed on the outer side of end cabinets.
Install two side plates for each end cabinet, one in the upper part and the other in the
lower part.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-37.
4 Hardware Installation Preparations
Figure 4-37.
54