FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)
Fault Type
shaped gap
Door box tilted with a Λ-
shaped gap
1.
Figure 6-25
piece furthest from the door frame clockwise to lift the door box until the V-shaped gap
disappears, as shown by (1) in
Figure 6-25 V-shaped gap
Figure 6-26 Adjusting the V-shaped gap
Issue 01 (2019-03-05)
Possible Cause
cabinet are not on the same
level. Usually the front is
higher than the rear.
The top front and rear of the
cabinet are not on the same
level. Usually the front is
lower than the rear.
shows a tilted door box. Turn the M6 door box screw in the leveling corner
Figure
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Installing the Contained Aisles
Measure
adjusting method, see
7.1.
For details about the
adjusting method, see
7.2.
6-26.
Step
Step
97