Installing An Actuator Or Converter - Huawei FusionModule5000 Series Installation Manual

FusionModule5000 Smart Modular Data Center
Installation Guide (Single-Row Aisle Containment with
2000 mm High Cabinets, ECC800)
Figure 9-26 Installation positions for monitoring components on the revolving door
(1) For the exit button
(4) For the access actuator
(7) For the AC actuator
(10) For the alarm beacon
(13) For the access control
device

9.8.2 Installing an Actuator or Converter

Context


Issue 01 (2019-03-05)
This section describes how to install a monitoring actuator and converter. For the specific
component names and BOM numbers, see
The monitoring components mentioned in this section can be installed in the same way.
The WiFi converter is used as an example.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) For the emergency exit
button
(5) For the skylight actuator
(8) For the revolving door
magnetic lock
(11) Pad mounting kit
(14) For the light button
Table 9-1.
9 Installing Monitoring Devices
(3) For the AC actuator
(6) For the WiFi
converter
(9) For the pad power
connector
(12) For the pad
128